Free Download Microsoft 74-697 VCE Test Engine Full Version Now 51-60

Vendor: Microsoft
Exam Code: 74-697
Exam Name: OEM Preinstallation
Version: 14.101

QUESTION 51
You plan to deploy an image to several client computers that have identical hardware installed.
You need to prevent the Plug and Play device drivers from being uninstalled and then reinstalled when the image is deployed.
Which configuration pass in the answer file should you modify?

A.    auditSystem
B.    oobeSystem
C.    specialize
D.    generalize

Answer: D
Explanation:
Persisting Plug and Play Device Drivers During the generalize Configuration Pass
You can persist device drivers when you run the Sysprep command together with the /generalize option. To do this, specify the PersistAllDeviceInstalls setting in the Microsoft- Windows-PnPSysprep component. During the specialize configuration pass, Plug and Play scans the computer for devices, and then installs device drivers for the detected devices. By default, the computer removes these device drivers from the system when you generalize the system. If you set the Microsoft-Windows- PnPSysprep\PersistAllDeviceInstalls setting to true in an answer file, Sysprep doesn’t remove the detected device drivers.

QUESTION 52
You work for an OEM system builder.
What are three possible ways to distribute Windows 8 OEM desktop operating system licenses? (Each correct answer presents a complete solution. Choose three.)

A.    A sealed System Builder pack that comes with the purchase of a new computer that has an
operating system preinstalled
B.    A sealed System Builder pack without the purchase of a computer
C.    A sealed System Builder pack that comes with the purchase of a new computer that does not
have an operating system preinstalled
D.    An unsealed System Builder pack without the purchase of a computer
E.    An unsealed System Builder pack that comes with the purchase of a new computer that does
not have an operating system preinstalled
F.    An unsealed System Builder pack that comes with the purchase of a new computer that has
an operating system preinstalled

Answer: ACF
Explanation:
System Builder OEM Windows is intended for Pre-Install on a new PC. (not B, not D, not E)
Note:
Windows 8 licensing terms for OEM system builder packs
* Opened pack
By opening the pack, you agree to the license terms. You must preinstall the license for Windows desktop software onto a fully assembled PC’s hard drive using the OPK.
* Unopened pack
Unopened packs can be delivered to another system builder–an OEM, assembler, refurbisher, or preinstaller of software on computer systems.

QUESTION 53
You are creating an answer file for a deployment of Windows 8.
You need to specify the keyboard layout in the answer file.
What should you configure in the answer file?

A.    UserLocale
B.    UILanguage
C.    InputLocale
D.    SystemLocale

Answer: C
Explanation:
InputLocale – This setting specifies the input locale and keyboard layout combinations.

QUESTION 54
You are preparing the hard disk drive for a Unified Extensible Firmware Interface (UEFI)- based computer.
You start the computer from a Windows Preinstallation Environment (Windows PE) environment.
You need to ensure that you can start Windows from the hard disk drive.
Which command should you use?

A.    Bcdedit
B.    Bcdboot
C.    Diskpart
D.    Bootsect

Answer: B
Explanation:
The BCDboot tool is a command-line tool that enables you to manage system partition files. You can use the tool in the following scenarios:
* Setting up a system partition when you deploy new computers. For more information, see Capture and Apply Windows Images.
* Setting up Windows to boot to a virtual hard disk. For instructions, see Walkthrough:
Deploy a Virtual Hard Disk for Native Boot.
* Repairing the boot environment located on the system partition. If the system partition has been corrupted, you can use BCDboot to replace the system partition files with new copies of these files from the Windows partition.

QUESTION 55
You are creating a Windows 8 answer file.
You need to modify the order in which the app tiles appear on the Start screen.
Which component should you add to the answer file?

A.    Microsoft-Windows-Deployment
B.    Microsoft-Windows-Setup
C.    Microsoft-Windows-SharedAccess
D.    Microsoft-Windows-Shell-Setup

Answer: D
Explanation:
The Microsoft-Windows-Shell-Setup contains elements and settings that control how the shell of the Windows operating system is installed on a destination computer.

QUESTION 56
You work for an OEM system builder named Fabrikam, Inc.
You are creating a Windows 8 reference image for a customer.
The customer wants to name each newly deployed client computer based on the serial number of the computer.
You create a custom script to rename each computer based on the computer’s serial number obtained from the BIOS.
You need to ensure that the script executes after Windows Setup is complete and that the script executes with elevated access privileges.
Which object should you configure in the Microsoft-Windows-Shell-Setup element of the answer file?

A.    FirstLogonCommands
B.    ComputerName
C.    AutoLogon
D.    LogonCommands

Answer: A
Explanation:
FirstLogonCommands specifies commands to run the first time a user logs on to the computer. These commands are run only once. Commands run during FirstLogonCommands are silently elevated (as long as the logged- on user has administrative privileges) because running these commands requires either editing the registry with administrative privileges or launching Windows Setup with FirstLogonCommands specified in an unattended installation answer file.

QUESTION 57
A technician applies an image of Windows 7 to a client computer.
The technician reports that several errors occurred during the Windows Welcome phase of the setup.
You need to view the errors that occurred during Windows Welcome.
Which file should you view?

A.    Setupact.log
B.    Setupapi.offline.log
C.    Cbs_unattend.log
D.    Setupapi.dev.log

Answer: A
Explanation:
Setupact.log
Contains information about setup actions during the installation.

QUESTION 58
You have a reference computer.
You need to capture an image of the reference computer.
You generalize the image.
What should you do next?

A.    Log on to a technician computer as a local administrator and start Windows System Image Manager
(Windows SIM).
B.    Start the reference computer by using Windows Preinstallation Environment (Windows PE).
C.    From the reference computer, open a command prompt as a local administrator.
D.    Log on to a technician computer as a local administrator and run dism.exe.

Answer: B
Explanation:
Creating a Build-to-Plan (BTP) Windows Image In the build-to-plan (BTP) scenario, you create a single Windows reference image to install computers that use the same hardware configuration. You customize the single Windows reference installation by installing Windows and then adding additional drivers and applications. You then capture the Windows image and use it to install your computers. No additional modifications are made to this image.
This scenario comprises the following stages:
You install Windows on a reference computer.
After the installation is complete, you boot the computer and install any additional device drivers or applications.
After you update the Windows installation, you run the sysprep /oobe /generalize command. The /generalize option instructs Sysprep to remove system- specific data from the Windows installation. System-specific information includes event logs, unique security IDs (SIDs), and other unique information. After the unique system information is removed, the computer shuts down. The /oobe option instructs the Windows installation to run Windows Welcome the next time the computer boots.
After the computer shuts down, you can boot to Windows PE or another operating system on the computer.
You then capture the Windows installation with ImageX, by creating a reference image with which to install computers with the same hardware configuration.

QUESTION 59
You are preparing a new Windows 8 image. The image will be deployed to the computers sold by your company.
You need to add the company’s technical support hours, technical support phone number, and technical support URL to the image.
Which component of the answer file should you modify?

A.    Microsoft-Windows-Setup
B.    Microsoft-Windows-Shell-Setup
C.    Microsoft-Windows-RemoteAssistance-Exe
D.    Microsoft-Windows-HelpAndSupport

Answer: D
Explanation:
HelpAndSupport specifies Original Equipment Manufacturer (OEM) information for customized pages in Help and Support. This information appears in several locations in Help and Support. These locations include the home and escalation pages.
Incorrect:
Not B:
The Microsoft-Windows-Shell-Setup contains elements and settings that control how the shell of the Windows operating system is installed on a destination computer.

QUESTION 60
Which statement correctly describes the functionality of the Windows 8 version of Reagentc?

A.    Reagentc can be used to service an online image and an offline image.
B.    Reagentc can be used to service an online image only.
C.    Reagentc can be used to service an offline image only.
D.    Reagentc can be used from Windows Preinstallation Environment (Windows PE) only.

Answer: A
Explanation:
REAgentC.exe is used for deploying custom Windows Recovery Environment (Windows RE) as well as for enabling image recovery solutions. You can run the REAgentC command on an offline Windows image or on a running Windows operating system.

If you want to pass Microsoft 74-697 exam successfully, donot missing to read latest lead2pass Microsoft 74-697 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/74-697.html