Easily Pass 70-417 Exam By Training lead2pass New Microsoft Practice Materials VCE Dumps 1-10

If you want to pass Microsoft 70-417 exam successfully, do not missing to read latest lead2pass Microsoft 70-417 dumps. If you can master all lead2pass questions you will able to pass 100% guaranteed.

QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. You install Windows Server 2012 R2 on a new computer named DC3. You need to manually configure DC3 as a domain controller. Which tool should you use?

A.    winrm.exe
B.    Server Manager
C.    dcpromo.exe
D.    Active Directory Domains and Trusts

Answer: B
Explanation:
When you try to DCpromo a Server 2012, you get this message:

QUESTION 2
Your network contains an Active Directory forest named contoso.com. All domain controllers currently run Windows Server 2008 R2. You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2. The new domain controller will have the following configurations:

•    Schema master
•    Global catalog server
•    DNS Server server role
•    Active Directory Certificate Services server role

You need to identify which configurations cannot be fulfilled by using the Active Directory Installation Wizard.
Which two configurations should you identify? (Each correct answer presents part of the solution. Choose two.)

A.    Enable the global catalog server.
B.    Install the Active Directory Certificate Services role.
C.    Transfer the schema master.
D.    Install the DNS Server role.

Answer: BC
Explanation:
AD Installation Wizard will automatically install DNS and allows for the option to set it as a global catalog server. ADCS and schema must be done separately.

QUESTION 3
Your network contains an Active Directory forest. The forest contains two domains named contoso.com and corp.contoso.com. The forest contains four domain controllers. The domain controllers are configured as shown in the following table.

All domain controllers are DNS servers. In the corp.contoso.com domain, you plan to deploy a new domain controller named DC5. You need to identify which domain controller must be online to ensure that DC5 can be promoted successfully to a domain controller. Which domain controller should you identify?

A.    DC3
B.    DC4
C.    DC2
D.    DC1

Answer: A
Explanation:
In order to add a Domain Controller to corp.contoso.com, you need PDC and RID of that domain, not of the root domain. The Domain Naming Master is needed to add, remove and rename domains in the forest, i.e. not for individual Domain Controllers.

QUESTION 4
Your network contain an active directory domain named Contoso.com. The domain contains two servers named server1 and server2 that run Windows Server 2012 R2. You create a security template named template1 by using the security template snap-in. You need to apply template1 to server2. Which tool should you use?

A.    Security Configuration and Analysis
B.    Server Manager
C.    Security Template
D.    Computer management

Answer: A

QUESTION 5
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.

VM3 is used to test Applications. You need to prevent VM3 from synchronizing its clock to Server1.
What should you configure?

A.    NUMA topology
B.    Resource control
C.    Resource metering
D.    Virtual Machine Chimney
E.    The VLAN ID
F.    Processor Compatibility
G.    The startup order
H.    Automatic Start Action
I.    Integration Services
J.    Port mirroring
K.    Single-root I/O virtualization

Answer: I
Explanation:
Integration Services settings on virtual machines includes services such as operating system shutdown, time synchronization, data exchange, Heart beat, and Backup (volume snapshot services. Thus you should disable the time synchronization using Integration Services.

QUESTION 6
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.

You plan to schedule a complete backup of Server1 by using Windows Server Backup. You need to ensure that the state of VM1 is saved before the backup starts. What should you configure?

A.    NUMA topology
B.    Resource control
C.    Resource metering
D.    Virtual Machine Chimney
E.    The VLAN ID
F.    Processor Compatibility
G.    The startup order
H.    Automatic Start Action
I.    Integration Services
J.    Port mirroring
K.    Single-root I/O visualization

Answer: I
Explanation:
http://www.altaro.com/hyper-v/vss-crash-consistent-vs-Application-consistent-vss-backupspost-2- of-2/
Backup Operations in Hyper-V
No
VSS Writer Available?
In some cases, you need an Application-consistent backup but there is no VSS writer available. One example of this is MySQL. Hyper-V backups of virtual machines containing MySQL will always result in either a crashconsistent or an image-level backup. For MySQL, the latter is probably acceptable as MySQL doesn’t perpetually expand the log file. However, if you’re using MySQL within a VSS-aware VM, then a Hyper-Vbased backup tool is going to take a crash-consistent backup. MySQL (like any other database system) isn’t always recoverable from a crash-consistent backup; even when recovery is possible, it may be painful. MySQL is just one example; any number of line-of-business Applications could tell a similar tale. In the case of MySQL, one solution is to find a guest-level backup Application that is MySQL- aware and can back it up properly. For Applications for which no backup Application has a plug-in, you may need to have pre- and post-backup scripts that stop services or close Applications. If brief downtime is acceptable, you can disable the Backup item in Hyper-V Integration Services, thereby forcing Hyper-V to save the state of the VM during backup. This technique results in an image-level backup and can be used on any Application that doesn’t have a VSS writer.

QUESTION 7
Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the IP Address Management (IPAM) Server feature installed. You install the IPAM client on Server2. You open Server Manager on Server2 as shown in the exhibit. (Click the Exhibit button.)

You need to manage IPAM from Server2. What should you do first?

A.    On Server2, open Computer Management and connect to Server1.
B.    On Server1, add the Server2 computer account to the IPAM ASM Administrators group.
C.    On Server2, add Server1 to Server Manager.
D.    On Server1, add the Server2 computer account to the IPAM MSM Administrators group.

Answer: C

QUESTION 8
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed. On DC1, you configure Windows Firewall to allow all of the necessary inbound ports for IPAM. On Server1, you open Server Manager as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can use IPAM on Server1 to manage DNS on DC1. What should you do?

A.    Modify the outbound firewall rules on Server1.
B.    Add Server1 to the Remote Management Users group.
C.    Add Server1 to the Event Log Readers group.
D.    Modify the inbound firewall rules on Server1.

Answer: C

QUESTION 9
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the IP Address Management (IPAM) Server feature installed. You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1 and Server2. You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2. To which group on Server2 should you add Tech1?To answer, select the appropriate group in the answer area.

 

Answer:

QUESTION 10
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the IP Address Management (IPAM) Server feature installed. IPAM is configured currently for Group Policy-based provisioning. You need to change the IPAM provisioning method on Server1. What should you do?

A.    Run the ipamgc.exe command.
B.    Run the Set-IPAMConfigurationcmdlet.
C.    Reinstall the IP Address Management (IPAM) Server feature.
D.    Delete IPAM Group Policy objects (GPOs) from the domain.

Answer: C
Explanation:
You cannot change the provisioning method after completing the initial setup. When you install IPAM and configure either manual OR GPO, you receive the same message about not being able to change the provisioning method. As a matter of fact, I set it up in my lab and configured it as GPO. Here is a copy/paste of the message that is presently on the IPAM home page in server manager:
“The access configuration mode cannot be modified after completing the IPAM provisioning wizard” Also, the help console in IPAM displays this when searching about provisioning methods: “The managed server provisioning method cannot be changed after you complete the IPAM provisioning wizard.”

Thanks for you reading. Wish you pass 70-417 exam success.

www.lead2pass.com/70-417.html